Write to Read Delay

Write to Read Delay

Option name:

Write to Read Delay

Possible values of an option:

Depend on memory type, there can be a variant [Auto]

The option description:

The minimum time between the termination of operation of record and command giving on reading (parametre tWRT or, in other sources, tWTR). Considering that few manufacturers result value of this parametre for the modules of memory, installation [Auto] will be an optimum variant.

Other options identical to destination:

TWTR

TwTr Command Delay

Write to Read delay (Twtr)

Write Recovery Time (tWR)

Write Recovery Time (tWR)

Option name:

Write Recovery Time (tWR)

Possible values of an option:

Depend on memory type, there can be a variant [Auto]

The option description:

Establishes a delay between the termination of operation of record and the beginning of regeneration of memory (a parametre part tRAS). Usually this parametre name time of restoration for the record cycle, the reduced designation — tWR. For memory SDRAM delays in [1] or [2] steps are characteristic, DDR SDRAM is characterised by delays from [1] to [4] steps, DDR2 SDRAM — from [1] to [6] steps, DDR3 SDRAM — from [1] to [15] steps. As to find correct value of this parametre for concrete modules of memory happens difficult enough, installation [Auto] will be an optimum variant.

Other options identical to destination:

DRAM Write Recovery Time

TWR

TWR

Write Recovery Time

Write recovery time (Twr)

VIA-3058 AC97 Audio

VIA-3058 AC97 Audio

Option name:

VIA-3058 AC97 Audio

Possible values of an option:

[Auto], [Enabled], [Disabled]
Or
[Enabled], [Disabled]
Or
[Auto], [Disabled]

The option description:

The option is responsible for the integrated sound subsystem of class AC ’ 97. This decision, of course, loses on quality of sounding to discrete sound cards, but is quite suitable for the majority of situations. Usually codec AC ’ 97 is unsoldered on the motherboard, but there were decisions when codec AC ’ 97 represented the card of expansion inserted in special слот (AMR — Audio Modem Riser, CNR — Communication and Networking Riser or ACR — Advanced Communications Riser).

If you assume to use the integrated sound subsystem, establish for this option value [Enabled] (or [Auto] if [Enabled] is not present in the list of variants). Otherwise (you have discrete sound card or a sound to you is absolutely not necessary), the given option is necessary for disconnecting ([Disabled]).

Other options identical to destination:

AC97 Audio Select

AC97 Controller

ATI Azalia Audio

Audio

Audio Controller

Audio Device

Azalia

Azalia Audio

Azalia Codec

Azalia HDA Controller

Azalia/AC97 Audio

Azalia/AC97 Audio Select

Azalia/AC97 Selection

Azalia/HD Audio

HD Audio

HD Audio Controller

HDA Controller

High Definition Audio

NB Azalia

OnBoard AC ‘ 97 Audio

Onboard AC ‘ 97 Audio Controller

Onboard AC97 Audio Device

OnBoard Audio

Onboard Audio Controller

Onboard AUDIO Function

Onboard Azalia AUDIO

Onboard CMedia Sound

Onboard Creative Sound

Onboard Legacy Audio

OnChip Audio Controller

OnChip Sound

SiS AC97 Audio

(Tras) Minimum RAS active Time

(Tras) Minimum RAS active Time

Option name:

(Tras) Minimum RAS active Time

Possible values of an option:

Depend on memory type, there can be a variant [Auto]

The option description:

Sets quantity of steps between the reference to memory and the regeneration beginning (parametre tRAS in the access diagramme). For SDRAM values from [5] to [6] steps are typical. DDR SDRAM it is characterised by values from [5] to [8] steps, DDR2 SDRAM — from [10] to [15] steps, DDR3 SDRAM — from [18] to [30] steps. In case of qualitative memory it is possible to try to establish the underestimated value. Among possible values can be present and a variant [Auto] (the information undertakes from microcircuit SPD).

Other options identical to destination:

Act to Precharge Delay

Active to Precharge (Tras)

Active to Precharge Delay

DRAM Precharge Delay

DRAM RAS Activate to Precharge Delay

DRAM Timing tRAS

DRAM tRAS Select

DRAM Tras Timing Value

Min RAS# Active Time

Min RAS# Active Time (Tras)

Precharge Delay

Precharge Delay (tRAS)

RAM RAS Act. to Pre.

RAS Pulse Width

SDRAM Active to Precharge Time

SDRAM RAS Act. To Pre.

SDRAM Tras Timing Value

T (RAS)

TRAS

TRAS

Temperature Tolerance

Temperature Tolerance

Option name:

Temperature Tolerance

Possible values of an option:

From [0°C] to [7°C]

The option description:

At the included intellectual management gives the chance to specify a difference of temperatures between transition from the lowered turns to raised and back for the fan of a processor cooler. It is recommended to establish value of an order [3°C], the situation when the fan will continuously change the turns differently is possible, creating rather unpleasant noise background.

Other options identical to destination:

CPU Fan Tolerance

CPU Temperature Tolerance

CPU Tolerance temp

CPU Tolerance Temperature

FAN1 Delta Temp °C

Hysteresis Temperature

Smart CPU Fan Tolerance

Start Up Temperature (°C)

Start Up Temperature (°C)

Option name:

Start Up Temperature (°C)

Possible values of an option:

From [0] to [100]

The option description:

At the included intellectual management gives the chance to specify processor temperature at which achievement the fan of a cooler of the processor will earn on the minimum turns. Value of an order [40] °C will be optimum.

Other options identical to destination:

CPU Fan Start Temperature

CPUFAN2 Tmin

Fan Auto Mode Start Speed Temp

Q-Fan1 Start Temperature

Low CPU temp °C

Q-Fan1 Start Temperature

Smart Monitoring

Smart Monitoring

Option name:

Smart Monitoring

Possible values of an option:

[Auto], [Enabled], [Disabled]

The option description:

If you want to have the information on a condition of the hard disk, it is important to you to know about possible refusal of this device, include ([Enabled]) this option. But for it you will pay insignificant (it is possible even to tell, scanty) with reduction of productivity of the computer. If this information does not represent for you interest (on a disk simply there is no important data), it is possible to refuse constant monitoring ([Disabled]). The choice [Auto] will automatically include monitoring if it is supported by the store.

Technology S. M.A. R.T. (Self-Monitoring Analysis and Reporting Technology — the technology of constant monitoring of the analysis and granting of reports) on the basis of the analysis of work of the store is capable to warn about possible refusal of a disk in the near future. Thus, having seen on the screen the prevention of a critical condition of a hard disk, you always will have time to keep the important data on the external carrier. Only it is not necessary to hope that S. M.A. R.T. It is capable to expect any refusals. Unfortunately, she finds out not all problems.

Other options identical to destination:

Hard Disk S.M.A.R.T

HDD S.M.A.R.T. Capability

HDD Self Diagnostic

HDD SMART Monitoring

HDD SMART Monitoring

SMART Boot Menu

S.M.A.R.T. for Hard Disks

S.M.A.R.T. for Hard Disks

S. M.A. R.T. for Hard Disks

Option name:

S. M.A. R.T. for Hard Disks

Possible values of an option:

[Enabled], [Disabled]

The option description:

If you want to have the information on a condition of the hard disk, it is important to you to know about possible refusal of this device, include ([Enabled]) this option. But for it you will pay insignificant (it is possible even to tell, scanty) with reduction of productivity of the computer. If this information does not represent for you interest (on a disk simply there is no important data), it is possible to refuse constant monitoring ([Disabled]).

Technology S. M.A. R.T. (Self-Monitoring Analysis and Reporting Technology — the technology of constant monitoring of the analysis and granting of reports) on the basis of the analysis of work of the store is capable to warn about possible refusal of a disk in the near future. Thus, having seen on the screen the prevention of a critical condition of a hard disk, you always will have time to keep the important data on the external carrier. Only it is not necessary to hope that S. M.A. R.T. It is capable to expect any refusals. Unfortunately, she finds out not all problems.

Other options identical to destination:

Hard Disk S.M.A.R.T

HDD S.M.A.R.T. Capability

HDD Self Diagnostic

HDD SMART Monitoring

HDD SMART Monitoring

S. M.A. R.T.

Smart Monitoring

Smart FAN Control Method

Smart FAN Control Method

Option name:

Smart FAN Control Method

Possible values of an option:

[Intel (R) QST], [Legacy], [Auto], [Disable]

The option description:

Specifies priorities at use of an intellectual speed control of the fan of a cooler of the central processor. At a choice [Intel (R) QST] the basic emphasis will be made on the minimum turns and, as consequence, silence. Value [Legacy] deduces the minimum temperature of the processor on the first place. The variant [Auto] is a certain compromise between silence and the minimum temperature of the processor. Is present and [Disabled], disconnecting an intellectual speed control of the fan of a cooler of the central processor.

Other options identical to destination:

CPU Fan Profile Mode

CPU Q-Fan Profile

Fan Profile

SDRAM RAS To CAS Delay

SDRAM RAS To CAS Delay

Option name:

SDRAM RAS To CAS Delay

Possible values of an option:

Depend on memory type, there can be a variant [Auto]

The option description:

Delay between signals RAS and CAS at the reference to a memory cell (parametre tRCD in the access diagramme). For SDRAM there are enough [2] steps, but for problem modules of memory it can be demanded to increase this value to [3]. If to speak about DDR SDRAM the delay usually makes the same [2] or [3] steps. For DDR2 SDRAM values from [3] to [6] steps, and for DDR3 SDRAM — from [6] to [10] steps are characteristic. Some problem modules of memory cannot normally work without installation obviously the worst values. Among possible values can be present and a variant [Auto] (the information undertakes from microcircuit SPD).

Other options identical to destination:

(Trcd) RAS to CAS R/W Delay

Active to CMD (Trcd)

DRAM RAS# to CAS# Delay

DRAM Timing tRCD

DRAM tRCD Select

DRAM Trcd Timing Value

RAM RAS# to CAS# Delay

RAS to Active Time (tRCD)

RAS to CAS Delay

RAS to CAS Delay (tRCD)

(Trcd) RAS to CAS R/W Delay

(Trcd) RAS to CAS R/W Delay

SDRAM RAS To CAS Delay

SDRAM RAS To CAS Delay

SDRAM Trcd Timing Value

T (RCD)

TRCD

TRCD